ELEMENT ANALYZER

 

ELEMENT ANALYZER

Elemental Analyzer Standard Configuration:

1. Computer
2. Printer
3. Main analyzer
4. Furnace reagent
5. High purity copper
6. N-Catalyst
7. H2O sorb reagent
8. Standard Reference Material(GBW)
9. CO2 sorb reagent
10. Silica wool 
11. Lower crucible
12. Upper crucible
13. O-ring kit
14. Tool kit

Elemental Analyzer is used to determine carbon, hydrogen, nitrogen content in solid and liquid material, such as coal, coke, oil, petroleum, biomass, fertilizer, plastic, food, hydrocarbons and plant tissue, leaves and tobacco, which is widely applied in power plants, coal mines, metallurgy, chemical industry, commercial inspection, scientific research, food industry, education etc.

Optional Configuration:

1. AR427 com-aid for liquid sample
2. Additional1 2 4 layers carousels
3. 4cm x 4cm size tin-foil cup
4. Bigger size hole carousel

Features:

Maximum Efficiency

1. High throughput: standard auto loader for 35 samples per layer, stackable to 4 layers available.
2. Dual-stage furnace system with pure oxygen flow to ensure the complete combustion of all samples.

Good Environment Adaptability 

1. Optimum gas circuit provides good gas tightness of the system.
2. O-ring free from heat resource.

Minimum Consumption

1. Independent detectors to determine C, H, N respectively. Analysis of CH mode and CHN mode can be chosen on software. (For 5E-CHN2200)
2. Saving time, gas and reagent: only 5.5ml blended gas needed to be analyzed.

Unattended Operation

The operator is limited to just adding sample to auto sample loader. Then the instrument will finish the test, cool down and shut off automatically.

Model	TR-EA-2000 Elemental Analyzer
Conforms to Method	AS 1038.6.4, ASTM D5373, ASTM D5291, ISO 16634, ISO 16948, ISO 29541, EN 15407,EN ISO 16948:2015-0, GB/T 30728, GB/T 30733, UNI 15104, UNI CEN/TS 15407
Analysis Time	4-6 mins, depending on sample combustion conditions
Sample Loader	Stackable auto loader, up to 140 samples by 4 layers
Repeatability	Carbon(Cad)≤0.45%, Hydrogen(Had)≤0.10%, Nitrogen(Nad)≤0.05%
Sample Mass	Up to 1000mg, depending on sample matrix
Temp. Resolution	1℃
Gas Required*	Helium, 99.99%, 0.25± 0.01 Mpa
	Oxygen, 99.5%, 0.25± 0.01 Mpa
	Nitrogen or compressed air, 0.25± 0.01 Mpa
Consumption	Helium 200ml/min
Furnace Type	Resistance furnace, Max temp 1050℃
Power Supply	Single phase, AC220V ±10% , 50/60Hz, 5.5kW
Net Weight	110kg
Dimensions(L×W×H)	690mm×750mm×720mm
*Test Condition: If N≤0.5%, 99.995% high purity oxygen is required.

SPARE PART CATALOG

KLIK DISINI

Produk Terbaru Lainnya: